User guide

Connections
Rename System
If there are different location areas that are using the same System, it is
possible to change the name of the system in the telephone for easier location
of the telephone, for example; S ystem A (Herrljunga), System A (Gothenburg).
1. Select Rename System.
2. Select the system to rename and press Edit.
3. Enter the new name.
4. Select Save.
Priority
The default order of priority is the order of entered subscriptions. This means
that the first subscribed system has the highest priority. This list can be edited
by the user. It is possible to set the systems in priority by moving them up or
down in the list. It is also possible to get priority information by selecting Info.
1. Select Priority.
2. Change the p riority if needed by selecting Up or Down. The priority will
be saved when Back is selected.
10.4 In Charger
10.4.1 Redirecting Calls and Messages fr
om Charger
Calls can be redirected to anothe
r extension when the cordless telephone i s
placed in the DC4 charger and the
Rack charger. The function is automatically
cancelled when the phone is rem
oved from the charger.
1. Select In charger mode and
press Select.
2. Navigate to Redirect an
dpressSelect to save the setting.
10.4.2 Detaching from system
while charging
When the cordless
telephone is placed in the charger the phone can be
detached from the
system but still be switched on and charging.
1. Select In charg
er mode and press Select.
2. Select Switch off and press
to save the setting.
51
1424-EN/LZT 103 090 Uen A1 2008-10-24