User guide

DT690
9.4.2 Automatic answer
Note: The automatically answer mode is only relevant when a headset or a
Bluetooth headset is connected.
To set the phone to answer automatically, do the following:
1. Enter
.
2. Select Answering and then select Answer behaviour.
3. Select Automatically and press Change to activate the automatic mode.
4. Press Back to save the setting.
All incoming calls will be connected automatically when this behavior is
selected.
To remove the s etting, press Change.
9.4.3 Automatic Lo udspeaker
To set the phone to automatically answer with loudspeaker, do the following:
1. Enter
.
2. Select Answering and then Answering behaviour.
3. Select Loudspeaking and press Change to activate the loudspeaking
mode.
4. Press Back to save the setting.
All incoming calls will be connected in loudspeaking m ode when this
behavior is selected.
To remove the s etting, press Change.
9.5 Modifying the Size of Messages
To modify the text size of messages:
1. Enter
.
2. Select Messages.
3. Select Text size and press Select.
The following options are available: Normal or Large.
46
1424-EN/LZT 103 090 Uen A1 2008-10-2 4