User guide

Important User Information
2.7 Accessibility and Voice Quality
The base network is not always available. If you do not get in contact with
your system, contact your system administrator. For best voice quality, avoid
positioning near computer, radio or similar equipment.
2.7.1 Operating area
You can use your cordless telephone in the area that is covered by the network.
Outside this area you will lose contact with the telephone network. The signal
strength icon,
, will disappear and No network will be displayed.
2.7.2 Out of Range
When you leave the system coverage area you will hear a short beep and see
a lamp indication, and the text Searching will appear in the display. The out
of range beep will be repeated every minute for 30 minutes. It is possible to
switch off this beep by pressing
. When reentering the coverage area it
can take a c ouple of minutes before the phone automatically has registered
into the system.
2.7.3 Frequency Range
The handset is a radio transmitter and receiver. When it is on, it receives
and sends out radio frequency (RF) energy. The handset operates on
different frequency ranges depending on market and employs c ommonly used
modulation techniques:
• EU 1880 - 1900 MHz
• U.S. 1920 - 1930 MHz
• L.A. 1910 - 1930 MHz
11
1424-EN/LZT 103 090 Uen A1 2008-10-24