User guide

DT690
1. Enter Settings from the main menu.
2. Select Locks.
3. Select Phone lock.
4. Select Auto phone lock.
5. Select On,orOn in charger.
6. Enter PIN code, press OK.
7. Press Back to save the settings.
When the phone is locked,
is shown in the display.
If forgotten, the PIN code can be removed by your distributor.
Note: Before using this feature, look up the IPEI code of your phone and write
it down, see Section 2.4 on page 10. If you forget the PIN code, contact
your certified Aastra Sales Partner for assistance, to reset to default.
20.7 Change Owner ID
The owner ID is set to identify the telephone.
1. Enter
.
2. Select Owner ID.
3. Enter the identity.
4. Press Save to save the setting.
20.8 Password Programming
You will be prompted to enter your user password when accessing certain
services, most particularly
• When placing a call in substitution or with signature from your extension or
a third party set.
• When activating/deactivating a call forward from your extension or a third
party set (follow me service).
• When consulting or personalizing your mailbox within your facility's
integrated voice mail system, when applicable.
By default, your user password is 1234. It is strongly recommended that you
change it to any other 4 digit code including the * or # key - to ensure that
use of the mentioned services is as secure as possible, and to preserve the
confidentiality of your mailbox, when applicable.
114
1424-EN/LZT 103 090 Uen A1 2008-10-2 4