User guide

DT690
Note: A call forward on mini-message is cancelled in the same manner as
any other type of variable call forward.
1. Press 61
2. Press *
3. Press #
4. 3 Enter the Mini-Message number
5. 1630Enter hours and minutes
6. Press *
7. Press Yes to confirm
8. Wait for the Service Acceptance Tone
9. Press No to finish the procedure
Example 3 Mini-Message sending: “IN A MEETING UP TO 16:30”
17.4 Follow-Me Service
In the case you have forgotten to
define your variable call forward before leaving
your extension, you may ask the
attendants to define it for your account. This
refers to the third party call
forward service that is reserved specifically for them.
As the case may dictate, you may also remotely define your call forward
recipient from his/her internal extension. This is the Follow me service.
The call forward remotely defined is always an immediate call forward.
If your DT690 phone is not available, you can still answer your calls by
forwarding them from an other DT690 phone. The call forwarding can be done
to the phone (only internal position) from which you activate the “Follow-me”
service or to an other phone (internal or external position).
Activating Follow-Me from the DT690 phone the calls are forwarded to
This is activated as described below, from an idle, remote extension, which will
be your call forward recipient:
1. Dial 65assigned to the Follow me service.
2. Dial your own extension number, and press
.
3. Enter your user password.
By default, your user password is 1234, however you may have modified
it. (See Section 20.8 on page 114).
4. Press
to activate the service.
98
1424-EN/LZT 103 090 Uen A1 2008-10-2 4