User guide

Call Forward ing Services
17.1 Variable Call Forwarding
Defining a variable call forwarding on a case-by-case basis is carried out within
the framework of your extension's service programming functions.
When your extension is i dle:
1. Dial the prefix that corresponds to the desired type of call forward (see list
below).
• 61(to activate an immediate call forward).
• 62(to activate a call forward on no-answer condition).
• 63(to activate a call forward on busy condition).
• 69(to activate a call forward on no-answer condition and busy
condition).
• 64(to activate a do not disturb call forwarding).
For the first four cases:
2. Dial the internal or external number that will be the recipient of your call
forwards.
As previously indicated, the recipient's number may contain up to 18 digits,
including the network access prefix. An external number may be one that is
accessible through abbreviated dialling.
Note: An external number is composed of the external access 0 prefix
followed by the actual external Directory number.
# To Dial only in case of an external Directory number. Needed to mark the
end of an external Directory number.
For every case:
3. Press
to confirm.
Wait for the Service Acceptance Tone.
4. Press
to finish the procedure.
Your extension returns to idle status.
The variable call forward that you have just defined is effective immediately.
95
1424-EN/LZT 103 090 Uen A1 2008-10-24