User guide

Settings
BusinessPhone – Cordless DT412/DT42298
Change system
When you have registered to more than one system, you can
manually select which system to connect to. You can connect to
up to four different PBX systems with your Cordless, normally
named A, B, C and D.
When you have entered settings:
á Select System .
á Select Select system .
â or ã Select the required system.
Note: The normal setting is Auto. This setting makes the
Cordless automatically look and connect to a system.
Select Press (see display).
System selected is shown.
System information
The Information menu shows general information about your
Cordless and your network connection.
When you have entered settings:
á Select System .
ã Select Information .
á Press.
You can view the following information:
Note: You cannot alter these settings.
IPEI
The unique global GAP registration number for
the Cordless.
IPDI
The unique global GAP registration number for
the SIM card.
SW
version
Here you can see which version of the Cordless
software you have.
AP SW
version
The alarm module software. If the alarm module
is not connected, it will be indicated with
NC
(Not Connected).