User guide

27BusinessPhone – Cordless DT412/DT422
Outgoing Calls
Notes:
Correct a wrong entry by pressing
C (see display). If you
decide not to make the call while keying in the number,
press
C (see display) to stop.
It is possible to turn on/off the tone sender in a predialled
number by making a long press on the
* key (e.g. when
calling telephone banks). Tone sender on will be indicated
with a
T in the number, and off with - . If a pause is required
in the number, it is added by making a long press on the
#
key. The pause is indicated with a
P in the number.
You can make your calls faster by programming Soft/Hot
keys with frequently used numbers. See section “Program
a Hot key or a Soft key with a phone number” on page 92.
Off hook
If you prefer to dial a number off hook:
æ Press.
Dial tone.
å Key your number on-line.
Notes:
When dialling this way, you cannot press
C (see display) to
erase digits.
The number is not
stored in the call list.
Handsfree
While you are waiting for a connection, dial tone or during the call:
ä Press the middle Soft key.
You are connected to the caller via the loudspeaker and
microphone.
Note: Which key to press depends on the answering
method used, to change the answering method see section
“Change answering method” on page 25.
End the call
æ Press.
The display shows the duration of the call.