User guide

45BusinessPhone – Cordless phone DT290
Mailbox System
Programming
B Press
or
*59#.i Dial and press
Notes: Depending on the configuration, you might be
asked for your password. See section “Security” on
page 63.
It is possible to program a number or function on the R/
Message key, if this is done, the default function to enter
your message system directly does not work any more. If
you want to use the Message Waiting function (default)
again, the number to enter the message system has to be
re-entered. See section “Programming a number or
function on the R/Message key” on page 50.
Follow the voice announcements
You can program the external notification number, the notification
time and activate/deactivate the function. The external number
(including the digit(s) for external call access) can consist of up to 24
digits. The time is entered in 24h-format, e.g. 2030 for half past eight
with values automatically set to even quarters, i.e. 2013 will be 2015.
Note: The notification number and time must be
programmed before you activate the notification.
,| Press to finish the procedure