User guide

Call Forwarding
BusinessPhone – Cordless phone DT29030
Program and activate a new external diversion address
To set a new individual external diversion address:
*22* Dial
0
Z
Dial the digit(s) for external call access and enter the new
external diversion address
A maximum of 24 digits.
Note: If your public network requires waiting for a second
dial tone, press
*.
# .i Press
Verification tone.
Wait for the call icon to stop flashing
,| Press to finish the procedure
Note: Individual External Diversion can also be used via the
DISA function, see section “Other Useful Facilities” on
page 55.
Cancel External Diversion
#22#.i Dial and press
Wait for the call icon to stop flashing
,| Press to finish the procedure
Note: The programmed diversion address is not removed
from the memory, the Diversion is just inactive.
Re-activate External Diversion
Divert your calls to an external position.
*22*#.i Dial and press
Wait for the call icon to stop flashing
,| Press to finish the procedure
You can make outgoing calls as usual. A special dial tone reminds
you that Call forwarding is active. The display shows that you have
activated an External Diversion.