User guide

7BusinessPhone – Ericsson Dialog 4422 IP Office
Description
1Display
Flexible graphical two-line display. See section “Display
Information” on page 10.
2 Settings
To switch the phone into Settings mode. See section “Settings” on
page 65.
3 Programmable keys
To store numbers, program functions. Can be programmed as dial
by name keys, function keys, etc. See section “Programmable
Keys” on page 65.
4Call List
To access the list of outgoing and incoming calls. When the key
lamp is flashing, there are unanswered incoming calls. See section
“Call List” on page 26
5Line
To initiate or receive calls.
6 Designation card
Use the Designation Card Manager to make and print your own
designation cards. The Designation Card Manager is included on
the Telephone Toolbox CD for BusinessPhone Communication
system which is part of the Quick Reference Guide.
7Mute
• To switch the microphone on or off during a call. See section
“Mute” on page 29.
• To switch off the ring signal in idle mode or when ringing. See
section “Settings” on page 65.
8 Volume control keys / Navigation keys
• To change the volume. See section “Settings” on page 65.
• To navigate in the Settings mode. See section “Settings” on
page 65.
• To navigate in the Call List. See section “Call List” on page 26.
9 Loudspeaker key / Select key / Log on key
• To switch the loudspeaker on or off. See section “During Calls”
on page 28.
• To activate Loudspeaker Preset. See section “Accessories” on
page 80.
• Used as select key in the Settings mode. See section “Settings”
on page 65.
For a description on how to use the Select key and Log on key, see
section “Hidden key functions” on page 9.