User guide

27Dialog 4422 IP Office
Incoming Calls
Incoming Calls
Answer calls
A ring signal and a flashing lamp indicate an incoming call.
On Line 1
Normally you will receive calls on Line 1.
u Lift the handset.
On Line 2 or Monitoring key
u Lift the handset.
ÖÔ Line 2 Press the flashing Line 2 key,
If you have an ongoing call (Line 1), the first call is put on hold.
or
ÖÔ Jim Press the flashing Monitoring key.
If you have an ongoing call (Line 1), the first call is put on hold.
Note: You can change the ring signal for the Monitoring
key, see section “Change ring signal for a Monitoring key”
on page 77.