User guide

Call Metering
BusinessPhone – Dialog 4224 Operator / Dialog 321454
reset Press to reset the faulty record (see display).
In this case no printout will be initiated to the connected printer.
return Press to return to previous menu (see display).
Operator supervised call
An extension can order an external call to be metered. The caller
can remain on the line or hang up (off line) while you establish the
call.
Option 1
Registration on the callers individual call meter:
Set up the external line.
See section “Make external calls” on page 24.
External dial tone.
meter Press (see display).
Continue setting up the external call, see section “Call Ordering” on
page 44.
Recall after the call is terminated:
ê Press.
The display informs about call duration, number of pulses or cost
(depending on the configuration). Note the information.
If you want to register the cost information:
12 May 10:35 +15°^||
C= 0 I= 0 ||
> 701 SPEECH<|| 207 FREE 1
>123456 MET<|| SMITH
save meter
12 May 10:35 +15°^||
C= 0 I= 0 || SMITH
701 RECALL || DURATION 00.00.50
MET || PULSES 3
Dialog4224En.book Page 54 Wednesday, April 2, 2003 3:19 AM