User guide

101BusinessPhone – Dialog 4224 Operator / Dialog 3214
Settings
settings Press (see display).
Continue by selecting which mode to change.
(answer, extend or signalling).
Answer mode
You can select between three different answer modes:
1. Answer manually with hook (default value).
2. Answer manually with answer key.
3. Answer automatically. (The call is connected automatically
without pressing a key.)
Note: If you have placed a call on a Monitor or Loop key
with mode 3 selected, the mode will temporarily switch to
mode 2 (to give the user a chance to pick-up incoming calls
from operator queue or calls put on hold on a monitor/Loop
key).
answer Press (see display).
forward Press to select answer mode (see display).
enter Press to confirm the settings (see display).
Clear
è Press to finish the procedure.
12 May 10:35 +15°^|| OPERATOR 200
C= 0 I= 0 ||
||
PHONE PROGRAMMING
answer extend signalling return
12 May 10:35 +15°^|| OPERATOR 200
C= 0 I= 0 ||
||
ANSWER MANUALLY WITH HOOK
backward forward enter return
Dialog4224En.book Page 101 Wednesday, April 2, 2003 3:19 AM