User guide

77Dialog 4186 High
Settings
Flash time
The default flash time (timed break) is 100 ms, but some systems
require a different flash time for the R-key. A flash time between
0 and 999 ms can be set.
Note: Do not change the flash time without consulting your
system administrator first. An incorrect flash time can
disable the flash function.
Changing flash time
In idle mode:
² Press.
¯or · Select the FLASH menu.
³² Press.
The display shows the current setting, for example:
Note: The default setting is 100 ms. Valid entries are all
flash times between 0 and 999.
¯or · Press to select the required value.
Steps of 10 ms.
or.
z Enter the required value.
This way, you can set the flash time in precise steps of 1 ms.
³² Press to save and exit.
FLASH
100