User guide

41BusinessPhone – Analog Telephone
Messages
Notification without Mailbox access:
You get a short voice announcement, informing that someone has
left a message for you. You acknowledge the notification by
pressing any key and you have to call back the Mailbox system in
order to retrieve the message.
Note: If you do not acknowledge the notification within the
pre-programmed time, the connection is cancelled and
repeated later (ask the system administrator for the
programmed number of notification attempts).
Programming:
u*59# Lift the handset and dial.
Note: Depending on the configuration, you might be asked
for your Password.
Follow the voice announcements.
You can program the external notification number, the notification
time and activate/deactivate the function. The external number
(including the digit(s) for external call access) can consist of up to
24 digits. The time is entered in 24h-format, e.g. 2030 for half past
eight with values automatically set to even quarters, i.e. 2013 will
be 2015.
Note: The notification number and time must be
programmed before you activate the notification.
d Replace the handset to finish the procedure.