User guide

During Calls
BusinessPhone – Analog Telephone26
Mute
Note: This function is not supported for other analog
telephones, only for the Dialog 4106 Basic and
Dialog 4147 Medium phone.
You have an ongoing conversation.
¥ Press to switch the microphone on or off.
When the lamp lights, the caller will not be able to hear the
conversation in your room.
Note: Mute key looks slightly different on the
Dialog 4147 Medium phone.
Inquiry
During an ongoing conversation you like to make an inquiry to an
internal or external party.
¸ Press.
The first call is put on hold.
z Call the third party.
When the third party answers you can switch between the calls,
create a Conference and end one of the calls.
Refer Back
You can switch between connected parties:
¸2 Switch between calls.
¸1 Press to terminate.
The ongoing call is terminated. The other call is connected.
Note: Sometimes the R key must be pressed twice. If no
speech connection could be established, it may take a few
seconds until you are re-connected to the original call.
Whether you can put internal calls on hold or transfer calls
to external lines depends on the configuration of your PBX.
Consult your system administrator.