User guide

Category Lists
BusinessPhone – System Administrator28
Create facility access category lists
You can configure 16 different category lists for facility access (0-
15). The functions you can set are the facility access functions in
group 30. When you program the category list, you can write down
the setting (Y or N) for each function. Use the chart at the beginning
of the guide to remember how you have configured the category
lists.
Example:
Edit the list for category 1 (Day/night initiation not allowed).
3001 Press.
Enter
Ô Press (pre-programmed).
1 Enter category list number (0-15).
Enter
Ô Press (pre-programmed).
z Change the value to YES.
Note: All category lists are assigned with default values.
Enter
Ô Press (pre-programmed).
The display steps to the next command.
Repeat the procedure for the remaining commands (3002-
3094).
You have configured the category list for category 1.
í Press to finish programming.
Note: The Transfer, Read& and Save/Redial functions are
not included in a category list, they should always be
individually programmed.
12 May 10:35 +15°
DAY/NIGHT COMMON 3001
backward forward return
12 May 10:35 +15°
DAY/NIGHT COMMON C 3001 1 NO
backward forward c/i return
SystemAdminEn.book Page 28 Wednesday, January 15, 2003 11:01 AM