User guide

13BusinessPhone – System Administrator
Start System programming
2nd Ô# Press.
You are now in Command mode.
Note: 2nd + # = Enter.
Tip! Program Enter on a programmable key to save time.
The recommended programmable key is key E. See
sections “Allocate number of programmable keys” on
page 31 and “Allocate Functions to Programmable Keys”
on page 35.
z Enter the relevant command group.
Available command groups are 01 to 91. See section “Command
Groups and Numbers” on page 61.
Enter
Ô Press (pre-programmed).
z Enter the relevant command number.
Available command numbers depend on the entered command
group, see section “Command Groups and Numbers” on page 61.
Enter
Ô Press (pre-programmed).
Tip! The command group and number can be entered in
one sequence, e.g. 0201 to allocate number of
programmable keys.
z Enter the relevant values.
The value could for instance be a facility number, extension
number, trunk number, command number or directory number. See
the example.
z Confirm the relevant value with YES or NO.
How to write text, see section “Write Text” on page 19.
Tip! When YES or NO is to be entered it is enough to just
enter the first letter, i.e Y or N.
í Press to finish programming.
Tip! To speed up your programming procedures, see
section “Navigation and Editing During Programming” on
page 15.
12 May 10:35 +15°
ENTER COMMAND
copy return
SystemAdminEn.book Page 13 Wednesday, January 15, 2003 11:01 AM