User guide

Start System programming
BusinessPhone – System Administrator12
Display info during System programming
The upper line shows general information. The mid line shows
command name, command number and values. The lower line
presents lead texts for the Menu keys.
0302 Command number.
XXXX Value (e.g. directory number).
YY Value (e.g. key number).
ZZ Value (e.g. YES or NO).
For further explanation of the display messages, see section
“Navigation and Editing During Programming” on page 15.
General System programming procedure
*00# Dial to enter Programming mode.
Note: The Menu key
prog and the Function code *00*
accesses Individual Programming mode only.
Tip! Program *00# on a programmable key to save time.
system Press (see display).
The Menu key
phone accesses Individual Programming mode.
z Enter the relevant Password.
See section “Password” on page 20.
12 May 10:35 +15°
ASSOCIATED NUMBER C 0302 XXXX YY ZZ
backward forward c/i return
12 May 10:35 +15°
SELECT PROGRAMMING
system phone
12 May 10:35 +15°
ENTER Password
SystemAdminEn.book Page 12 Wednesday, January 15, 2003 11:01 AM