User guide

During Calls
Dialog 321320
Send caller identity code at transfer
When transferring a call you can send the caller’s identity code or
number to the receiver’s display.
You have speech connection with an external party on Access 1.
h Inquiry Press to put the call on hold
Note: You can also press Access 2.
* 7 7 * Press
z # Dial the caller’s identity code or number and press
z Call the second party
h Transfer Press before or after answer
The ongoing call is transferred with the caller´s identity code or
number.
Note: You can only use this function if the receiver’s
telephone is programmed to handle identity codes.
Dialling during a connected call
When calling interactive tele services, e.g. telephone banks, you
need to use Dual Tone Multi Frequency (DTMF) signals. If your
exchange is not already programmed to automatically convert your
entered digits into DTMF signals, you need to activate the function
during the call.
During an ongoing call:
9 z Press and dial the requested digits
Entered digits are transferred as DTMF signals.
Notes:
You can also press
Tones (see display).
Finland press
1 and dial the required digits.