Operation Manual

Date and Time
Dialog 3185 and 3185MW64
Date and Time
Your telephone has a built in 24-hour clock, which is displayed
when the handset is on-hook (idle phone). To change the date and
time:
Slide the clock switch to “ON”
u Lift the handset
P Press and hold
The default date and time is displayed. The indication for “month” is
flashing.
z + Enter month (two digits) and press
The indication for “day” is flashing.
z + Enter day (two digits) and press
The indication for “hour” is flashing.
z + Enter hour (two digits) and press
The indication for “minute” is flashing.
z P Enter minute (two digits) and press to activate
The colon between hour and minute is flashing to indicate that the
clock is running.
Note: If a telephone connected in parallel with the Premium
telephone is used for more than 1 1/2 hours, the clock will
stop and must be set again.