Operation Manual

47Dialog 3185 and 3185MW
Abbreviated Numbers
Program
How to program a directory number on the programmable keys.
u Lift the handset
P Press
z Dial the number
You can use any directory number, e.g. a common abbreviated
number or a colleague’s extension number. You can also store
codes that contain
*, #, R and Tone. To store a number that
incorporates a wait for a new dial tone, see section “Outgoing
Calls” on page 11.
e Press a programmable key
Note: One press will store the number in the upper
memory, a double press will store the number in the lower
memory. You can remove the transparent cover in order to
write the names beside the keys. If a number is already
stored, it will be erased automatically. If you would like to
erase a dial-by-name number, store a “0” instead of the
telephone number.
d Replace the handset
Checking stored numbers
How to see a programmed directory number.
u Lift the handset
P Press
e Press the desired programmable key to see the programmed
number
Note: One press will display the number in the upper
memory, a double press will display the number in the lower
memory.
d Replace the handset