User`s guide

6(6)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 C
111/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
0140
Transmission group
This command is used to state in which transmission
group of the transmission matrix the extension should
be included. The transmission matrix is defined in
command 27xx and is used for adaptation of the
relative levels depending on which type of interface the
extension is connected to.
0141
Relative sending level
This command is used to state the relative
transmission level (Lo) in the analogue interface to
ELU-A.
valid data: -12dBr to + 6dBr (steps: 0,1 dBr)
default data: - 3 dBr
0142
Relative receiving level
This command is used to state the relative reception
level (Li) in the analogue interface to ELU-A.
valid data: -12dBr to + 6dBr (steps: 0,1 dBr)
default data: - 3 dBr
Equipment
Requires
ELU-A board
and / or
MFU board