Operation Manual

Paging (optional)
Dialog 3105MW/3145/3145MW/314668
If you want to send a digit message code:
u Lift the handset
* 8 1 * Press
z * Dial the extension number and press
z # Dial the message code (1-10 digits) and press
Wait for the acknowledgement tone.
d Replace the handset
If expected, wait for the paged person to call back.
To an s wer
From the nearest telephone within the system: Call the extension
number shown in the display of your paging receiver. If zeros are
shown it indicates that you are being paged from an external
subscriber. To answer:
u Lift the handset
* 8 2 * Press
z # Dial your own extension number and press
Or if only one paging call is permitted at the time:
u Lift the handset
* 8 2 # Press
If a message code is shown in the display, take the appropriate
action.