Operation Manual

During Calls
BusinessPhone – Analog Telephone18
Mute
Note: This section only applies to the Ericsson Basic and
Medium telephone.
You have an ongoing conversation.
m Press to switch the microphone on or off
When the lamp lights, the caller will not be able to hear the
conversation in your room.
Note: Mute key is slightly different on the Ericsson Basic
telephone.
Inquiry
During an ongoing conversation you like to make an inquiry to an
internal or external party.
y Press
The first call is put on hold.
z Call the third party
When the third party answers you can switch between the calls,
create a conference and end one of the calls.
Refer back
You can switch between connected parties:
y2 Switch between calls
y1 Press to terminate
The ongoing call is terminated. The other call is connected.
Note: Sometimes the “R”-key must be pressed twice. If no
speech connection could be established, it may take a few
seconds until you are re-connected to the original call.
Whether you can put internal calls on hold or transfer calls
to external lines depends on the configuration of your PBX.
Consult your system administrator.