Operation Manual

Outgoing Calls
BusinessPhone – Analog Telephone14
Wait for dial tone
Sometimes it is required to wait for a new dialling tone after dialling
the prefix digit when making an external call. In such situations, you
must store the pause for a new dial tone into the number:
On the Ericsson Basic and Medium telephone:
r Press
Note: This function is not supported for other analog
telephones.
Last external number redial
When you initiate an external call the system automatically stores all
the dialled digits, irrespective of whether the call was successful or
not. Stored numbers can consist of maximum 32 digits.
Note: To redial a number that incorporates a wait for a new
dial tone, you must indicate to the telephone where in the
number it must pause and wait for the new dial tone. To do
this, press the required key at the proper place in the
number. See section “Make calls” on page 13.
On the Ericsson Basic and Medium telephone:
u Lift the handset
r Press to redial the last dialled external number
On other analog telephones:
u Lift the handset
*** Press to redial the last dialled external number