Operation Manual

Not
f
or Comm
e
r
c
ia
l
Use
E
ricsson Mobile
Com
m
unic
a
t
i
ons A
B
92 Extra features
In case of the following message, try to subscribe again:
•
Subscription Failed : the AC number you have entered does not match the base
station PIN code or the base station already has eight handset subscrip-
tions. To add a handset you have to delete the subscription of another
handset.
You can provide a personal identity for the base station. The name is arbitrary
and is shown in the display when the handset is connected to the base station
and on standby. See “Editing base station name” on page 103.
Subscribing another type of handset
Your base station functions can be fully utilized when used in combination
with a DT200 handset. If it is used with another type of handset, there are a
few functions that will not work.
Please refer to the handset documentation for subscribing another type of
handset to the base station. To initiate subscription, you have to press the
PAGE button on the base station for at least two seconds. The base station
remains in the subscription mode for about 5 minutes.
Cancelling the subscription of a handset
Up to eight handsets can be subscribed to a base station. If you want to sub-
scribe a ninth handset, you must cancel the subscription of another.
To cancel a subscription of a handset:
Route:
BaseStation » Settings » Access » Desubscribe
1. Select Access and press YES.
PIN: is displayed.
2. Enter the PIN code for the base station (see page 78) and press
YES.
3. Select
Desubscribe and press YES.
Dev.Number: is displayed.
4. Enter the number of the handset whose subscription you want to cancel.
5. Press
YES to confirm.
Either
Desubscribe Handset? or Handset not known is displayed. In the latter
case, you have entered a non-existent handset number.
6. Press
YES to confirm.
The subscription for that handset is cancelled.
To cancel your subscription on the base station, please refer to “Deleting sub-
scription” on page 104.
John 2
01–Dec 11:32