Operation Manual

Not
f
or Comm
e
r
c
ia
l
Use
E
ricsson Mobile
Com
m
unic
a
t
i
ons A
B
70 Personalizing the answering machine
The answering machine time stamp tells you when messages were received.
The time stamp, which tells you day and time, can be played before the
recorded message. The time stamp message can be enabled or disabled for
each type of answering machine access.
Base station access
To have time stamp messages when you are controlling the answering
machine via the base station:
Route:
BaseStation » AnswerMach » Settings » TimeStamp » BaseStation
1. Select BaseStation and press YES.
The current setting is displayed.
2. Press
UP or DOWN to select the setting you want.
3. Press
YES to confirm.
Remote access via external line
To have time stamp messages when you are accessing the answering
machine remotely via the external line:
Route:
BaseStation » AnswerMach » Settings » TimeStamp » ExtRemote
1. Select ExtRemote and press YES.
The current setting is displayed.
2. Press
UP or DOWN to select the setting you want.
3. Press
YES to confirm.
Handset access
To have time stamp messages when you are controlling the answering
machine by calling in with a handset:
Route:
BaseStation » AnswerMach » Settings » TimeStamp » IntRemote
1. Select IntRemote and press YES.
The current setting is displayed.
2. Press
UP or DOWN to select the setting you want.
3. Press
YES to confirm.
The time stamp messages can be played while calling in. However, if the
answering machine is controlled via the handset menus, no time stamp mes-
sages are heard (the time stamp is shown on the display).
TIME STAMP