Operation Manual

Not
f
or Comm
e
r
c
ia
l
Use
E
ricsson Mobile
Com
m
unic
a
t
i
ons A
B
64 Personalizing the base station
Priority phone deactivation
To deactivate a handset as priority phone:
Route:
BaseStation » Settings » Advanced » PriorityNo » AssignNo
1. Select Advanced and press YES.
PIN: is displayed.
2. Enter the PIN code for the base station (see page 78) and press
YES.
3. Select
AssignNo and press YES.
The number of the priority phone handset is displayed.
4. Press
CLR to remove the number.
5. Press
YES to confirm.
The priority phone is deactivated.
Scanning period for priority phone within range
If a priority phone is activated, the base station scans for the handset at regular
intervals. The time between scans can be set. The scanning interval is a choice
between not being reachable for a short period and frequently activating and
deactivating call diversion if the handset is nearly out of range.
To set the scanning period:
Route:
BaseStation » Settings » Advanced » PriorityNo » ScanPeriod
1. Select Advanced and press YES.
PIN: is displayed.
2. Enter the PIN code for the base station (see page 78) and press
YES.
3. Select
ScanPeriod and press YES.
The current scan period is displayed in minutes (default is 2).
4. Enter the number of minutes between scans (1 - 10).
5. Press
YES to confirm.
The scanning period for the priority phone is changed.
In some situations, such as when using the phone as a baby monitor, it is con-
venient if the handsfree in the base station automatically answers internal
calls. Before it does so, a ringing sound is heard to let you know you have a
call. This feature is normally off.
To enable or disable automatic answering of the base station handsfree:
Route:
BaseStation » Settings » AutoAnswer
1. Select AutoAnswer and press YES.
The current setting is displayed.
2. Use the
UP or DOWN key to select the required setting.
3. Press
YES to confirm.
See also “Baby phone” on page 79.
AUTOMATIC ANSWERING