Reference Manual Part 6

8 (102) BRU3 MANUAL
BRU3 MANUAL, Doc.no: 198 17-CAAA 808 288 Uen Rev H, 2003-06-06
-------------Setup Radio Operation Parameters 44
-------------PA Bias and FDAC Calibration Menu 72
------------------PA Bias Driver 72
------------------PA Bias Final 72
------------------FDAC Rx 72
------------------FDAC Tx 72
------------------Setup Radio Operation Parameters 73
------------------Set Transmitter On/Off 73
--------Radio Register Editor Menu 74
-------------Read Radio Register 74
-------------Write Radio Register 74
--------Adjustment Menu 75
-------------OCXO Age Adjustment Menu 76
------------------Increment 76
------------------Decrement 76
------------------Set Value 76
------------------Mark for Storage in EEPROM 77
-------------Save Adjustment in EEPROM 75
--------Setup Menu 78
-------------Frequency Band 78
-------------Channel Spacing 78
-------------Radio Board ROA 79
-------------Default TX Channel Number 79
-------------Default RX Channel Number 79
-------------Load and Save Default Calibration Data 79
-------------Save Parameter in Physical EEPROM 79
----Modem Operation Menu 80
--------Line Speed on Modem Port 80
--------DTR Status 80
--------RTS Status 80
--------Transparent Mode Access 80
----Status Overview Menu 81
----Edit Loader Parameters Menu 82
--------Node 0 82
--------Ports Menu 84
-------------Port 84
-------------Unit Number 85
-------------Local Port Number 86