Reference Manual Part 6
Table Of Contents
- FBTEST Reference Manual
- 1 Introduction
- 2 Installation Procedures
- 3 Hardware, Equipment and Preparation
- 4 FBTEST User Modes
- 5 User Interface Description
- 6 Main Menu
- 6.1 Board Test Menu
- 6.1.1 Alt. 1: Do the Test
- 6.1.2 Alt. 2: Number of Test Cycles
- 6.1.3 Alt. 3: Select/Unselect Boards
- 6.1.4 Alt. 4: Select Extended Test
- 6.1.5 Alt. 5: Select Medium Test
- 6.1.6 Alt. 6: Unselect all Tests
- 6.1.7 Alt. 7-11: Sets the Test Parameters for Each Board
- 6.1.8 Alt.7: Set Parameters for FCB–FE Computer Board
- 6.1.9 Alt. 8: Set Parameters for FRB–FE Radio Board
- 6.1.10 Alt. 9: Set Parameters for FNB–FE Connection Board
- 6.1.11 Alt. 10: Set Parameters for FMB–FE Modem Board
- 6.1.12 Alt. 11: Set Params for FPB–FE Power Supply Board
- 6.1.13 Alt.12: Look at Test Results
- 6.2 Set Time
- 6.3 Radio Operations
- 6.4 Measurement Setup Menu
- 6.4.1 Transceiver Control and Presentation Menu
- 6.4.2 Radio Calibration Menu
- 6.4.3 Bandgap Calibration
- 6.4.4 Temperature Sensor Calibration
- 6.4.5 Reference Oscillator OCXO Calibration
- 6.4.6 PF Output Power Calibration
- 6.4.7 PR Reflected Power Calibration
- 6.4.8 VCO Modulation Calibration
- 6.4.9 TCXO Modulation Calibration
- 6.4.10 RSSI Calibration
- 6.4.11 EEPROM Display Editor Menu
- 6.4.12 PA Bias and FDAC Calibration Menu
- 6.4.13 Radio Register Editor Menu
- 6.4.14 Adjustment
- 6.4.15 Setup
- 6.5 Modem Operation Menu
- 6.6 Status Overview Menu
- 6.7 Edit Loader Parameters Menu
- 6.1 Board Test Menu
- 7 Index
FBTEST REFERENCE MANUAL 101 (102)
BRU3 MANUAL, Doc.no: 198 17-CAAA 808 288 Uen Rev H, 2003-06-06
7.1 Menu Index
Adjustment Menu 72
Bandgap Calibration Menu 44
Board Test Menu 17
Channels Menu 89
Connections Menu 92
Edit Loader Parameters Menu 79
EEPROM Display Editor Menu 67
Frequency Mode Menu 35
Main Menu 15
Measurement Setup Menu 37
Modem Operation Menu 77
Modem Parameters Menu 84
Number Mode Menu 33
OCXO Age Adjustment Menu 73
PF Output Power Calibration Menu 51
PF Reflected Power Calibration Menu 54
Radio Calibration Menu 42
Radio Control and Calibration Menu 30
Radio Register Editor Menu 71
Read Parameters from FLASH Menu 94
Reference Oscillator OCXO Calibration Menu 48
RSSI Calibration Menu 65
Select/Unselect Boards Menu 19
Set Test Parameters for FCB Menu 21
Set Test Parameters for FMB Menu 24
Set Test Parameters for FNB Menu 23
Set Test Parameters for FPB Menu 25
Set Test Parameters for FRB Menu 22
Set Time Menu 29
Setup Menu 75
Status Overview Menu 78
Store Parameters in FLASH Menu 95
TCXO Modulation Calibration Menu 61
Temperature Sensor Calibration Menu 46
Transceiver Control and Presentation Menu 39
Transceiver Setup Menu 32
VCO Modulation Calibration Menu 57
X.25 Parameters Menu 88
, 91