Reference Manual

8 (110) BRU1/BRU3 MANUAL
BRU1/BRU3 MANUAL, Doc.no: b3fb_ref Uen Rev PJ5, 2004-02-19
-------------Save Calibration in EEPROM 51
-------------Setup Radio Operation Parameters 51
-------------PA Bias and FDAC Calibration Menu 79
------------------PA Bias Driver 79
------------------PA Bias Final 79
------------------FDAC Rx 79
------------------FDAC Tx 79
------------------Setup Radio Operation Parameters 80
------------------Set Transmitter On/Off 80
--------Radio Register Editor Menu 81
-------------Read Radio Register 81
-------------Write Radio Register 81
--------Adjustment Menu 82
-------------OCXO Age Adjustment Menu 83
------------------Increment 83
------------------Decrement 83
------------------Set Value 83
------------------Mark for Storage in EEPROM 84
-------------Save Adjustment in EEPROM 82
--------Setup Menu 85
-------------Frequency Band 85
-------------Channel Spacing 85
-------------Radio Board ROA 86
-------------Default TX Channel Number 86
-------------Default RX Channel Number 86
-------------Load and Save Default Calibration Data 86
-------------Save Parameter in Physical EEPROM 86
----Modem Operation Menu 87
--------Line Speed on Modem Port 87
--------DTR Status 87
--------RTS Status 87
--------Transparent Mode Access 87
----Interface Board Menu 88
-------------Configuration Data Display Menu 89
----Status Overview Menu 90
----Edit Loader Parameters Menu 92
--------Node 0 92
--------Ports Menu 94
-------------Port 94