Reference Manual

FBTEST REFERENCE MANUAL 51 (110)
BRU1/BRU3 MANUAL, Doc.no: b3fb_ref Uen Rev PJ5, 2004-02-19
Alt. 5 PR POWER CALIBRATION
Gives PR Power Calibration menu 1, Figure 31.
Alt. 6 VCO MODULATION CALIBRATION
Gives VCO Calibration menu 1, Figure 33.
Alt. 7 TCXO MODULATION CALIBRATION
Gives TCXO Calibration menu 1, Figure 35.
Alt. 8 RSSI CALIBRATION
Gives RSSI Calibration menu 1, Figure 37.
Alt. 9 EEPROM DISPLAY (EDITOR)
This alternative selects a function that will display all calibration
object values. This is an overview display with the purpose of
showing how calibration objects depend on temperature. Please refer
to Figure 38.
Alt. 10 SAVE CALIBRATION IN EEPROM
This alternative saves the calibration parameters in EEPROM if
something is changed. This function is called when the exit command
is used, to protect from accidental exit without saving calibration data.
Alt. 11 SETUP RADIO OPERATION PARAMETERS
Each calibration procedure requires the radio to operate with some
specific frequency, modulation or power level. This alternative is a
call to the same procedure as in the transceiver setup menu. Please
refer to Figure 19.
Alt. 12 PA BIAS AND FDAC CALIBRATION
Gives the PA Bias and FDAC Calibration Menu, Figure 42.