Reference Manual

26 (110) BRU1/BRU3 MANUAL
BRU1/BRU3 MANUAL, Doc.no: b3fb_ref Uen Rev PJ5, 2004-02-19
6.1.8 Alt.7: Set Parameters for FCB – FE Computer Board
[Main menu, Board Test, Set test parameters for FCB]
Note:
Figure 7 Test for FCB – FE Computer Board (BRU3).
Alt. 1 - 9 A toggle function between “+” (select) and ”-” (unselect), is used
to include or exclude boards from the test.
Test for FCB SYS:yyyy-mm-dd hh:mm
Current test selection is MEDIUM
1 + DRAM test
2 - Exhaustive DRAM test
3 + DPRAM test
4 + Signal Processor test
5 + Communication IC Internal test
6 - FLASH Boot Memory test
7 - FLASH System Memory test
8 - Alarm test
9 - Ethernet Module test
0. Test menu
Choose alternative:
“ + ” = select
“ - “ = unselect