Reference Manual

20 (110) BRU1/BRU3 MANUAL
BRU1/BRU3 MANUAL, Doc.no: b3fb_ref Uen Rev PJ5, 2004-02-19
6.1 Board Test Menu
This menu is shown if alternative 1, “Board Test”, is selected in the Main Menu.
From this menu, all tests can be configured and executed. The batch test
sequence for each board type is chosen from the different board type menus, and
so are all the interactive tests. Figure 3 “Board Test menu (BRU3).” and Figure
4 “Board Test menu (BRU1).” shows the Board Test Menu.
[Main menu, Board test]
Figure 3 Board Test menu (BRU3).
Board Test menu SYS:yyyy-mm-dd hh:mm
Current test selection is MEDIUM
1 Do the test
2 Number of test cycles (0=Forever)
3 Select/unselect boards
4 Select extended test (External HW needed)
5 Select medium test
6 Unselect all tests
7 Set test parameters for FCB
8 Set test parameters for FRB
9 Set test parameters for FNB
10 Set test parameters for FMB
11 Set test parameters for FPB
12 Look at test results
0. Main menu
Choose alternative: