Reference Manual
Table Of Contents
- FBTEST Reference Manual
- 1 Introduction
- 2 Installation Procedures
- 3 Hardware, Equipment and Preparation
- 4 FBTEST User Modes
- 5 User Interface Description
- 6 Main Menu
- 6.1 Board Test Menu
- 6.1.1 Alt. 1: Do the Test
- 6.1.2 Alt. 2: Number of Test Cycles
- 6.1.3 Alt. 3: Select/Unselect Boards
- 6.1.4 Alt. 4: Select Extended Test
- 6.1.5 Alt. 5: Select Medium Test
- 6.1.6 Alt. 6: Unselect all Tests
- 6.1.7 Alt. 7-11: Sets the Test Parameters for Each Board
- 6.1.8 Alt.7: Set Parameters for FCB–FE Computer Board
- 6.1.9 Alt. 8: Set Parameters for FRB–FE Radio Board
- 6.1.10 Alt. 9: Set Parameters for FNB–FE Connection Board (BRU3 only)
- 6.1.11 Alt. 10 (BRU3): Set Parameters for FMB–FE Modem Board
- 6.1.12 Alt. 10 (BRU1): Set Parameters for FIB - FE Interface Board
- 6.1.13 Alt. 11: Set Params for FPB–FE Power Supply Board (BRU3 only)
- 6.1.14 Alt.12: Look at Test Results
- 6.2 Set Time
- 6.3 Radio Operations
- 6.4 Measurement Setup Menu
- 6.4.1 Transceiver Control and Presentation Menu
- 6.4.2 Radio Calibration Menu
- 6.4.3 Bandgap Calibration
- 6.4.4 Temperature Sensor Calibration
- 6.4.5 Reference Oscillator OCXO Calibration
- 6.4.6 PF Output Power Calibration
- 6.4.7 PR Reflected Power Calibration
- 6.4.8 VCO Modulation Calibration
- 6.4.9 TCXO Modulation Calibration
- 6.4.10 RSSI Calibration
- 6.4.11 EEPROM Display Editor Menu
- 6.4.12 PA Bias and FDAC Calibration Menu
- 6.4.13 Radio Register Editor Menu
- 6.4.14 Adjustment
- 6.4.15 Setup
- 6.5 Modem Operation Menu (BRU3 only)
- 6.6 Interface Board Parameters Menu (BRU1 only)
- 6.7 Status Overview Menu
- 6.8 Edit Loader Parameters Menu (BRU3 and System Release R14 only)
- 6.1 Board Test Menu
FBTEST REFERENCE MANUAL 109 (110)
BRU1/BRU3 MANUAL, Doc.no: b3fb_ref Uen Rev PJ5, 2004-02-19
Index
Adjustment Menu 82
Bandgap Calibration Menu 52
Board Test Menu 20
Channels Menu 102
Connections Menu 105
Edit Loader Parameters Menu 92
EEPROM Display Editor Menu 75
Frequency Mode Menu 43
Interface Configuration Menu 88
Main Menu 17
Measurement Setup Menu 45
Modem Operation Menu 87
Modem Parameters Menu 97
Number Mode Menu 41
OCXO Age Adjustment Menu 83
PA Bias and FDAC Calibration Menu 79
PF Output Power Calibration Menu 59
PF Reflected Power Calibration Menu 62
Radio Calibration Menu 50
Radio Control and Calibration Menu 38
Radio Register Editor Menu 81
Read Parameters from FLASH Menu 107
Reference Oscillator OCXO Calibration Menu 56
RSSI Calibration Menu 73
Select/Unselect Boards Menu 23
Set Test Parameters for FCB Menu 26
Set Test Parameters for FIB Menu 31
Set Test Parameters for FMB Menu 30
Set Test Parameters for FNB Menu 29
Set Test Parameters for FPB Menu 32
Set Test Parameters for FRB Menu 28
Set Time Menu 37
Status Overview Menu 90
Store Parameters in FLASH Menu 108
Store Parameters to FLASH Menu 108
TCXO Modulation Calibration Menu 69
Temperature Sensor Calibration Menu 54
Transceiver Control and Presentation Menu 47
Transceiver Setup Menu 40
VCO Modulation Calibration Menu 65