User guide

Alarms
Table 4.5 Status LED States
Condition LED State
ON - RF Enabled on at least one QAMs/Connector, system
clocks locked
Steady Green
FLASH - Critical alarm (SW), system clocks NOT locked. Flashing Green
NO RF (disabled on all channels within connector) OFF
Note: Critical Alarm.
4.6.3 Ethernet Status Indicator
There are two LEDs carried by each data connector. The left-most LED indicates
the channel activity and the right-most LED indicates channel status (Link level
connection active). The status LED will glow orange for 1000BaseT and green for
100BaseT.
4.7 Unit Alarm List
Table 4.6 Unit Alarm List
Name Source Slot Alarm Id
Data 1 Connection Input Card 1 00001001
Data 2 Connection Input Card 1 00001002
Data 3 Connection Input Card 1 00001003
Data 4 Connection Input Card 1 00001004
Serial Number Input Card 1 00001009
Software Watchdog Input Card 1 00001010
Card 1 Output Card 1 2 00001028
Card 2 Output Card 2 3 00001029
Card 3 Output Card 3 4 00001030
Card 4 Output Card 4 5 00001031
Card 5 Output Card 5 6 00001032
Card 6 Output Card 6 7 00001033
Card 7 Output Card 7 8 00001034
Card 8 Output Card 8 9 00001035
Open CAS Connection Input Card 1 00001244
PSU 1 Input Card 1 00001249
2/1553-FGC 101 1019 Uen A
4-10