User guide

Operating the EQ8096 Using the Web Browser
3.5.3 CA Settings
Figure 3.37 CA Settings Web Page
Selecting CA Settings enables settings to be defined for:
• Connection Test Interval – keep alive traffic test interval between EQ8096 and
OpenCAS server or EIS.
• Connection Timeout – the wait time before an OpenCAS alarm is raised.
• Open CAS Port
• Crypto Period Duration – proposed key change interval.
• Preferred ECMG Poll Period – same as above between ECMG and EQ8096.
• CA XML File Download – enables/disables CA configuration file download on
the EQ8096. Default is enabled.
• EMMG TCP Port – allows TCP port number to be defined for EMMG. If this is
defined, EMMG UDP port is not defined.
• EMMG UDP Port – allows UDP port number to be defined for EMMG. If this is
defined, EMMG TCP port is not defined.
• PDG UDP Port – port number for connection via Private Data Group.
• Nagle Algorithm – enables/disables Nagle Algorithm for combining smaller
status messages into one larger message.
This tab also allows for the extraction of the CA Status File from the EQ8096.
2/1553-FGC 101 1019 Uen A
3-31