User guide

Operating the EQ8096 Using the Web Browser
3.4.2 Input Port to RF Output Card QAM Channel Assignment
Any to any mapping enables the unit to map any transport streams on any Input Port
to any RF Output Card QAM channel.
Navigation to different Transport Stream MAC assignment pages is configured using
the TS Input Assignments tabbed page, see Section 3.7.
Figure 3.19 show the MAC assignment page which allows the user to populate a
Transport Stream with different MAC sources. The maximum number of Programs
that can be assigned a MAC input source is 64.
Figure 3.19
Populating a Transport Stream with MAC Sources
Under the actions available page are the options available to the user to edit. The
Remove All Services option clears all the MAC sources associated with particular
TS, in the case above TS5.
Figure 3.20 looks at the MAC assignment for TS1; where each one of the four MACs
has been assigned to a program. Note how the color of each MAC clearly shows
which program is sourced from which MAC. If the Remove Service button is
pressed, Program 7 for TS1 would lose the assignment
2/1553-FGC 101 1019 Uen A
3-19