User guide

Operating the EQ8096 Using the Web Browser
Figure 3.8 Data Port Settings Web Page
3.3.3.1 Data Port 1-4
This provides the facility to set the required Data Port parameters: Port Address and
Subnet mask for both the Primary and redundant Secondary.
Figure 3.9 Dataport 1 Settings (similar for Dataport 2-4) Web Page
Notes: The user configurable parameter that selects the required input is stored so
that the correct configuration is restored on power up.
Redundant Data ports can have the same attributes as the Main in the pair
(MAC address, IP parameters), or separate allocation of IP and mask.
When the unit is ordered with SFP data connectors, SFP modules are not
included as standard.
3.3.3.2 Data MAC Statistics
The page provides packet statistics for the selected MAC. The page provides details
on Current, Minimum, Maximum and Average rates for both Received bits per
seconds and Received Packets per second.
2/1553-FGC 101 1019 Uen A
3-13