User guide

Operating the EQ8096 Using the Web Browser
Figure 3.5 Global Control Port Settings
Each of the 4 ports can have their IP address and Mask changed. The link status of
the port is also shown in Figure 3.6.
Figure 3.6 Individual Control Port Settings
Caution!
If the Main Control Port IP address is changed, the new address will not take effect
until the unit is power cycled. The Control port will remain on the original IP address
until this action is performed.
3.3.2.4 CA Port Main
To review the CA Port Main settings on the Device info 2 page, click CA Port Main
to display the web pages shown in Figure 3.7.
2/1553-FGC 101 1019 Uen A
3-10