User guide

Installing the Equipment
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
2.2 Preliminary Checks
2.2.1 Mechanical Inspection
When taking delivery of an EQ8096, check the equipment items delivered against
the enclosed delivery note. Inspect the equipment for damage in transit. If in doubt,
contact Customer Services (see Preliminary Pages).
Note: Do not remove the covers of this equipment as doing so may invalidate any
warranties, cause a safety hazard and/or affect the EMC performance. It
may also invalidate any safety tests. Check with Customer Services
beforehand.
2.2.2 Moving the Equipment Safely
Do not place this product on an unstable cart, stand, bracket, or
table. The product may fall, causing serious injury and serious
damage to the product. Use only with a cart, stand, bracket or table
recommended by Ericsson.
An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
Do not move or carry the equipment whilst it is still connected to the supply or other
leads, is live or is in operation.
2.3 Installing the Equipment
2.3.1 Fixing Method
The EQ8096 can be operated mounted in a 19-inch rack. Ensure that it is firmly and
safely located and has an adequate through-flow of air.
Slide the unit onto the chassis supports and affix to the rack by means of an M6 x 18
mm panhead screw in each corner.
Do not use this product as a support for any other equipment.
2/1553-FGC 101 1019 Uen A
2-4