User guide

Technical Specification
Parameter Range Default value
Modulation configuration. Parameters to be used to configure all Modulated outputs.
Mode Annex A Annex B Annex C Annex A
Annex A Annex B Annex C Annex A Annex B Annex C
Constellation 64QAM
256QAM
64QAM
256QAM
64QAM
256QAM
64QAM 64QAM 64QAM
Symbol Rate
(MSym/s) with
resolution of
1 symbol/sec
Fixed Fixed Fixed 6.952
64QAM:
5.056941
256QAM:
5.360537
64QAM:
5.350
256QAM:
5.350
Interleaving Depth (I,J)
(12,17)
(Fixed)
(128,1)
(64,2)
(32,4)
(16,8)
(8,16)
(128,2)
(128,3)
(128,4)
(128,5)
(128,6)
(128,7)
(128,8)
(12,17)
(Fixed)
(12,17) (64,2) (12,17)
Centre RF output
frequency for
carrier 1 (MHz)
with resolution of
10 kHz
57-855 (996
when 1GHz
license
enabled)
57
RF output level
(dBmv) with
resolution of
0.1 dBmV
44..58 44
Channel number 1..4 1..4
Channel mode
(RF output
status)
ON
OFF
Test
Dual Tone
OFF
RF Output
Configuration.
An entry for each RF
connector (3)
ENABLED,
DISABLED
ENABLED
Software watchdog
reset
ENABLED, DISABLED DISABLED
Activate Unit reset
2/1553-FGC 101 1019 Uen A
B-9