User guide

EQ8096 M-CMTS System Test Specification

When the DEPI sessions have been configured with the correct set up and the core

is running you should see activity in the “DEPI Statistics” Web GUI page, e.g.:

Here we have 4 sessions set up but no activity:

Figure 10.9 Four Sessions, No Activity

Here we have 4 sessions set up but this time the EQAM is receiving data from the

EQAM:

Figure 10.10 Four Sessions, Receiving EQAM Data

If you have configured your system and see no activity on this page then you likely

have a configuration problem.

Note: The stats page refreshes periodically. The stats can be reset by selection

the “Reset All” selection on the Web GUI page. The average bit rate is a

running bit rate, measured from when the box is started or from when the

last time the stats were reset.

2/1553-FGC 101 1019 Uen A

10-9