Operating instructions

Specific Ancillary (ANC) Data types can be configured on/off, to be extracted from the HD-SDI input and carried as specified
depending upon the data type.
ANC Data
The following is a summary of the ANC Data functionality available from the unit.
EN8190 HD H.264 VCM Module (VP/HWO/EN8190/ENC)
The HD H.264 VCM has a unique processing engine that extracts the maximum efficiency possible from the H.264 specification.
Summary of Features
Video Encoding
Describes the Video processing functionality available in the HD H.264 VCM.
Audio Encoding
Describes the Audio Inputs and Coding Modes provided by the HD H.264 VCM.
HD Ancillary Data Procssing
Describes the ANC data extraction and processing capabilities of the HD H.264 VCM.
Summary of Features
Overview
The EN8190 HD H.264 Video Compression Module (VCM) is a 2 card solution to provide an option to encode a single high definition
video input using the H.264 algorithm.
Component Comments
Closed Captions
Via SMPTE 334 (extracted from VANC data - 29.97Hz operation only) and
carried in the 'Picture User data' (user_data_registered_itu_t_t35 SEI
message) of the video stream as per ATSC A/72 part 1
Generic VANC
Up to 2 MBit/s of ANC data (excluding embedded audio) can be extracted and
carried in the VBI component as defined in SMPTE 2038.
Time Code
Via SMPTE 12-2 (extracted from VANC data) and carried in the elementary
stream (in the pic_timing SEI message) and the transport stream adaptation
layer as per ETSI TS101 154
OP-47 (Subtitles)
Teletext subtitles are extracted from ANC in accordance with OP-
47 and carried
in a teletext PID.
© Ericsson AB 2011. All rights reserved
© Ericsson AB 2011. All rights reserved
Page
26
of
153
Cover
9/11/2012
file://C:\Users\ebriacl\AppData\Local\Temp\~hh7DF.htm