User guide

PSIG Support
2/1553-FGC 101 1014 Uen B
I-6
I.4 Alarms/Reported Faults
I.4.1 Correct Operation
The best confidence measure that it is working is seeing the PSI/SI in the output
transport stream. The PSIG generator should be reporting any problems.
I.4.2 Error Messages
All PSIG errors are defined in Section 9.9 of the ETSI specification. If any of these
errors are triggered they are reported to nCC as warning alarms, they currently
persist for 30 seconds then are cleared so they can be logged.