User guide

Technical Specification
B.9 Compliance
3
B.9.1 Safety
This equipment has been designed and tested to meet the requirements of the
following:
EN 60950-1 European Information technology equipment – Safety.
IEC 60950-1 International Information technology equipment – Safety.
UL 60950-1 USA Information technology equipment - Safety.
B.9.2 EMC
4
This equipment has been designed and tested to meet the following:
EN 55022
and
CISPR22
European
International
Emission Standard
Limits and methods of measurement of radio
frequency interference characteristics of
information technology equipment - Class A.
EN 61000-3-2 European Electromagnetic Compatibility (EMC), Part 3
Limits; Section 2. Limits for harmonic current
emissions (equipment input current ≤ 16 A
per phase).
EN 61000-3-3 European Electromagnetic Compatibility (EMC), Part 3.
Limits; Section 3. Limitation of voltage
fluctuations and flicker in low voltage supply
systems for equipment with rated current ≤ 16
A.
EN 55024 European Information technology equipment - Immunity
characteristics - Limits and methods of
measurement.
FCC USA Conducted and radiated emission limits for a
Class A digital device, pursuant to the Code
of Federal Regulations (CFR) Title
47-Telecommunications, Part 15: Radio
frequency devices, subpart B - Unintentional
Radiators.
3
The version of the standards shown is that applicable at the time of manufacture.
4
The EMC tests were performed with the Technical earth attached, and configured using recommended cables.
2/1553-FGC 101 1014 Uen B
B-14