User guide

Technical Specification

B.2.3 ASI IN 1 – 2

B.2.3.1 Connector Specifications

Table B.4 ASI Input - Transport Stream Input (2 off)

Item Specification

Safety status SELV

Connector designations

ASI IN 1

ASI IN 2

Connector type BNC

Connector Impedance

75 Ω

Data coding 8B/10B

Supported Packet size 188/204 bytes per transport stream packet

Channel rate 270 MBaud

Burst mode Byte and single packet burst mode supported

Specification EN 50083-9:2002 Annex B

Note: The transport stream rate must be less than or equal to 213.72 Mbps to be

supported via an ASI interface.

B.2.4 ASI OUT 1 – 4

The MX8400 Multiplexer is capable of creating up to a maximum of eight

independent transport stream outputs. Each ASI output can be individually

configured. For example, a single transport stream maybe sent to all ASI outputs or

a different transport stream may be sent to each ASI output.

A transport stream carried via the Ethernet Data GbE output interface may also be

sent via an ASI output port. All ASI interfaces are configured via nCompass Control.

Byte mode and single packet burst mode only

2/1553-FGC 101 1014 Uen B

B-6