User Guide Part 2
Installing the RBS Main Unit Understanding the Daughter Cards
92-F0423-1 Ericsson Proprietary 4-3
7RVHFXUHWKHFKDVVLVWLJKWHQWKHFDSWLYHIDVWHQHUVRQWKHERWWRPRIWKHPDLQ
PRXQWLQJEUDFNHWWKHUHFRPPHQGHGWRUTXHLVLQOEV
1FP
CAUTION
If you do not tighten the bolts at the bottom of the main unit chassis after
mounting, the chassis could come loose if subjected to vibration or an
earthquake.
,QVWDOODQGWLJKWHQWKHFRQGXLWORFNQXWV
CAUTION
Use extreme care when tightening the conduit lock nuts so as not to
damage the cables.
Understanding the Daughter Cards
<RXLQVWDOOGDXJKWHUFDUGVRQWKHPDLQXQLWVLJQDOVXUJHPRGXOHVWRSURYLGH
IXQFWLRQDOLW\IRUSULPDU\DQGVHFRQGDU\EDFNKDXO*36DQGDODUPV7DEOH ¥
LOOXVWUDWHVWKHGDXJKWHUFDUGVDQGFRQQHFWLRQV
Table 4–1 Daughter Cards
Primary and Secondary
Backhaul Cards
Uses either a standard RJ-45
connector or a 5-position, cam-type
(Riacon). The Riacon backhaul card
is not normally provided in the United
States; contact Ericsson if you want
to use this card.
8 7 6 5 4 3 2 1
RX– (Ring1)
RX+ (Tip1)
N.C.
TX– (Ring)
TX+ (Tip)
Primary (left)
RT1R1T
RX– (Ring1)
TX+ (Tip)
TX– (Ring)
RX+ (Tip1)
Primary (left)
N.C.
Balanced
T1/E1 RJ-45
T1/E1 Riacon